HDMI SDI CVBS Inputs COFDM Video Transmitter Module 300Mhz ~ 860MHz

COFDM Video transmitter module Introduction:

Feature and port:

• H.264 video decompression playback function, maximum support 1080P@60fps decoding playback, backward compatible with other various resolutions, frame rate decoding playback. It can realize the low-latency high-definition digital wireless image transmission function. The minimum video delay can be about 60ms at 720P@60fps, and the minimum video delay can be about 130ms at 1080P@60fps. This delay refers to the delay from the HDMI video input at the transmitter to the HDMI output display at the receiver, excluding the delay of the front-end camera at the transmitter (we measured the delay of a certain brand of SLR camera to be around 70ms, and a well-known brand of sports camera to have a delay of around 130ms).
• Audio and video output:
• HDMI-A type port audio and video output (HDMI out)
• AV audio and video output (6PIN port)
• USB Host interface output to mobile phone or tablet
• Ethernet port output
• Support AES decryption function (match the encryption of the transmitter, set the password through the configuration panel)
• Parameter configuration serial port (Config UART): It can be connected to a PC or a parameter control panel for parameter configuration, and it can also be connected to other upper computers for parameter configuration (such as drone remote control). Config UART is TTL 3.3v level.
• Transparent data transmission serial port (Data UART), TTL 3.3v level
• USB Host port
• External U disk/mobile hard disk storage
• Stream the video to the mobile phone/tablet, and realize the simultaneous display of HDMI, AV and mobile phone video at the same time
• TF card interface (used for software upgrade and maintenance, data storage, etc.)
• Keys+LEDs: can lead to power indicator light, RF signal receiving indicator light, record indicator light, OSD on/off button, Record

Transmitter parameter:

Receiver module specification:

Kimpok Technology is a leading of High-tech global enterprise in developing and manufacturing. Company established in 1998 and located in Shenzhen China. Specializing in the provision of advance wireless microwave communication system to the broadcast, UAV, public surverillance and defense industries. By continuously investing in innovation and combining exceptional products and services, Kimpok offers superior solutions that enable our customers to do their jobs even more effectively.

Kimpok Technology has a very strong technical team and R&D capacity. we dedicated to developing the high level wireless mobile video surveillance system for application of Law enforcement and military, field forces, radar, R/C helicopter, security & protection, government departments, military, security systems, oil field, Vessel, large mines, factories and so on.

Last for 15 years, Kimpok Technology continually concentrate on researching and innovating in the wireless high speed mobile video transmission industry based in LOS/NLOS environments,especial for Unmanned aircraft vehicle(UAV), airborne area and soldier man-pack areas. COFDM modulation and TDDworking mode transmitter/receiver are our demonstrable advantages.All the products production must be in very strict quality management by using US original (HP) spectrum analyzer and Germany (Rohde & Schwarz) Network Analyzer.

The transmitter and receiver are with Anti-jamming, high quality image, long range transmission distance, and have a highly appraise in this area. Company’s developing and long-term programming is the key way for leading us to be the leader at this area, we always believe we can do it. We will continually concentrate on researching and innovating in the wireless microwave transmission industry.

Welcome to tell use your needs, we will try to meet your requirements and custom made a special device for you.” Your support and suggestions are our motivation”. We aim to provide our users worldwide exclusive advanced wireless videography system.

Testing Equipments: